EMAAD × VULCAN PUMPS
Introduction
American-engineered heavy-duty submersible slurry pumps, now available across Iraq, Turkey and Oman through Emaad — the official Vulcan Pumps distribution partner.
Everything about EMAAD × VULCAN PUMPS
A GAME-CHANGING COOPERATION
PARTNERSHIP ANNOUNCEMENT
Emaad is proud to announce its official distribution partnership with Vulcan Pumps LLC of Birmingham, Alabama — a Brownlee-Morrow Company and manufacturer of the Vulcan HDS heavy-duty submersible slurry pump range. Together, we bring hard-metal, USA-built pumping technology to the region’s mining, power generation, sand & gravel, and oil & gas operators.
Since 2011, Emaad has supplied oil, gas and petrochemical equipment to many of the region’s major operators. This partnership pairs that regional trust and logistical reach with a manufacturer whose pumps are purpose-built, hard-metal, and stamped with a simple promise: “Forged for Life.”
For our customers, it means direct access to genuine Vulcan HDS, HDSS and HDS-XP pumps — American engineering, factory specification, and full technical documentation — supported locally by Emaad’s project and after-sales teams.
Vulcan Pumps LLC — At a Glance
- Manufacturer of the Vulcan HDS Heavy-Duty Submersible Slurry Pump family
- A Brownlee-Morrow Company, headquartered in Birmingham, Alabama, USA
- Pumps designed, engineered and built in the USA
- Motors UL Listed and CSA Certified; explosion-proof models FM Approved for Class I Groups C & D
- Hard-metal 28% chrome iron liquid ends, with duplex stainless, super duplex and Hastelloy C options
- Dedicated product lines for mining/steel, power generation, sand & gravel, and oil & gas
Custom pontoon-mounted floating pump packages engineered to project spec
THE VULCAN PUMP FAMILY
FOUR PUMPS. ONE STANDARD OF TOUGHNESS.
Every Vulcan pump Emaad brings to market shares the same hard-metal DNA — high-chrome or duplex-stainless liquid ends, sealed-for-life bearings, and seals engineered to run dry. Choose the platform that matches your slurry, your site, and your hazard classification.
Vulcan HDS
| Horsepower | 5 – 200 HP |
| Discharge Size | 2″ – 8″ |
| Capacity | 50 – 6,000 GPM |
| Head | 5′ – 285′ |
| Max Particle Size | Up to 3.50″ |
| Liquid End | 28% Chrome Iron, A532 Cl. III Type A |
| Seals | Double mechanical, John Crane Type 21, oil bath |
Vulcan HDSS
| Liquid End | CD4 Duplex Stainless (A890-1B Gr. CD4MCU) |
| Optional Alloys | 2205, 2507 Super Duplex, Alloy 20, Hastelloy C |
| Motor Housing / Shaft | 316 SS housing, 316 SS shaft |
| Seal Faces | Silicon Carbide, Viton elastomers |
| Cable | 50′ power & control cable standard |
| Hardware | 316 Stainless Steel |
Vulcan HDS-XP
| Motor | Heavy-Duty FM Approved Explosion-Proof |
| Liquid End | 28% Chrome Iron (Duplex Stainless CD4MCu optional) |
| Seal Faces | Silicon Carbide |
| Coating | Novocoat SP 2000W Protective Coating |
| Sensors | Thermal overload & moisture sensor |
| Applications | Fracking, t sands, washdown sumarps |
Vulcan HDS 250L & 300L
| Discharge Size | 10″ (250L) / 12″ (300L) |
| Motor Power | 100–200 HP (250L) / 150–300 HP (300L) |
| Max Particle Size | 2.5″ (250L) / 3″ (300L) |
| Construction | Chrome iron, 650 BHN hardness |
| Stand | Cast 316 Stainless Steel |
| Cable | 50′ power & control cable |
BUILT TO RUN WHEN NOTHING ELSE WILL
ENGINEERING STANDARD — STANDARD ON EVERY UNIT
Standard on every Vulcan HDS pump — not options bolted on later. This is the baseline Emaad guarantees on every unit we deliver.
Internal Slurry Seal
Double mechanical seals run in an oil-filled chamber, fully isolated from the pumped slurry — with carbon-ceramic and silicon carbide, or tungsten carbide, face options for continuous run-dry capability.
28% Chrome Iron Construction
A532 Cl. III Type A high-chrome casing, impeller, suction liner and agitator — maximum material thickness for long service life against abrasive solids.
Particle Ejection Ports
Expel solids to extend seal life and maintain minimum flow during closed-valve operation — a detail most competitors omit.
316 Stainless Fasteners Standard
Every fastener, screened inlet and clearance gasket specified for corrosion resistance as standard, not upgrade.
Dual Moisture & Thermal Sensors
Dual moisture sensor probes and thermal overload sensors signal early seal failure before it becomes a costly repair.
Explosion-Proof Motor Option
UL Listed and CSA Certified explosion-proof enclosures per Class I Groups C & D, plus FM Approved motors on the HDS-XP — engineered for oil & gas classified areas.
WHERE VULCAN PUMPS WORK
FOUR INDUSTRIES. ONE REGION READY FOR THEM.
Iraq, Turkey and Oman share the same demanding conditions Vulcan pumps were built for. Emaad matches the platform to the application.
Mining & Steel
- Kaolin clay & red mud decanting
- Magnetite recovery
- Clarifier sludge, slag & scale pits
- Flume flushers & interceptor pumps
Power Generation
- Coal pile runoff & crusher sumps
- FGD blowdown sumps
- Bottom ash transport
- Fly ash sumps & ponds
Sand & Gravel
- Weir overflow & recycle water
- Cyclone feed
- Wheel wash pumps
- Dredging & barge unloading
Oil & Gas
- Drilling mud reclamation
- Tripping tanks & fracking
- Tar sands
- Washdown & transport unloading sumps
SPECIFY BY THE METAL, NOT THE MARKETING
MATERIALS OF CONSTRUCTION
Vulcan publishes exact ASTM material grades for every wetted component — the standard Emaad holds every quotation to.
| COMPONENT | HDS STANDARD | HDSS / OPTIONAL |
| Casing / Impeller / Suction Liner | 28% Chrome Iron — A532 Cl. III Type A | CD4MCu (A890-1B); 2205 & 2507 Duplex; Hastelloy C |
| Motor Shaft | 420 / 416 Stainless Steel | 17-4 PH or 316 SS optional |
| Motor Housing | Ductile / Cast Iron | 316 SS (HDSS) with HPL coating optional |
| Pump Stand | High-Strength Ductile Iron, A536 Gr. 80-55-06 | 316 Stainless Steel, A351 CF8M (Alloy 20 optional) |
| Fasteners | 316 Stainless Steel | Alloy 20 optional |
| Seal Faces | Tungsten Carbide (John Crane Type 21) | Silicon Carbide (Eagle Burgmann ED560) |
| Elastomers | Buna | Viton |
REGIONAL REACH. AMERICAN MANUFACTURING.
WHY THIS PARTNERSHIP
Emaad has spent over a decade building the relationships, logistics and after-sales infrastructure that major oil, gas and petrochemical operators in Iraq, Turkey and Oman rely on. Pairing that with a hard-metal pump manufacturer built around a single idea — Forged for Life — gives our customers factory-grade equipment without the friction of an unfamiliar overseas supplier.
1 · Genuine Vulcan Specification
Factory materials, seal configurations and motor certifications — quoted and delivered exactly as engineered in Birmingham, Alabama.
2 · Application Engineering
Emaad’s team matches HDS, HDSS, HDS-XP or 250L/300L platforms to your slurry, flow and hazard classification before you commit to hardware.
3 · Regional Logistics
Local project coordination across Iraq, Turkey and Oman, backed by Vulcan’s parts and technical support network.
4 · Full Documentation
ASTM material certs, hydraulic performance curves and explosion-proof approvals supplied with every quotation — no ambiguity for your engineers.
ABOUT EMAAD
A TRUSTED NAME IN REGIONAL OIL & GAS EQUIPMENT SINCE 2011
Emaad is a leading supplier of oil, gas and petrochemical equipment across Iraq, Turkey and Oman. Founded in 2011, the company was built to bring high-quality products and dependable service to a region where equipment failure is not an option — and it has stayed committed to that goal ever since.
Emaad has grown into a trusted partner for many of the major operators in the region, built on a track record of reliable sourcing, technical support and long-term relationships. This partnership with Vulcan Pumps LLC extends that track record into heavy-duty slurry handling — one of the most demanding equipment categories in mining, power generation and oil & gas.
SPECIFY A VULCAN PUMP FOR YOUR NEXT PROJECT
Send Emaad your application details — slurry type, flow, head and site conditions — and our team will match you to the right Vulcan HDS, HDSS, HDS-XP or 250L/300L configuration.
